LetsTrust TPM til Raspberry Pi

399,00 NOK
(319,20 NOK ekskl. mva)

LetsTrust TPM – en brukervennlig TPM-løsning for Raspberry Pi single board computer platform.

Kun 4 på lager

Produktnr: 9801 Kategorier: , Kompatibilitet:


LetsTrust TPM is an add-on GPIO TPM module for the Raspberry Pi platform based on an Infineon Optiga ™ SLB 9670 TPM 2.0. It is compatible with all Raspberry Pi models including the Raspberry Pi 4 . Device tree overlay support with Raspbian Kernel> = 4.14.85

TPM features

  • Infineon Optiga ™ SLB 9670 TPM 2.0
  • Compliant with TPM Specification 2.0 Rev. 01.38
  • Firmware> = 7.85
  • TRNG (Real Random Number Generator) – True Hardware Random Number Generator

Design & interface

  • Interface to the Pi: SPI
  • Compatible with all previously released Raspberry Pi models (including Pi 3, Pi Zero, etc.)
  • Compact size thanks to 2×5 pin headers, so the remaining GPIO pins remain freely available
  • Can be firmly soldered with Raspberry Pi pins
  • fits into common standard housings

Software support

  • from Raspbian Stretch with the kernel 4.14.85 build in support with a device tree overlay
  • Built-In Support for Windows 10 IoT (on Pi 2, 3, 3B +)

Software downloads


Scope of delivery:

  • LetsTrust TPM module
  • 8-pin header (installation aid to determine the correct position for the TPM module without counting)


  • The LetsTrust TPM board is developed in Germany
  • The PCB production of LetsTrust TPM takes place exclusively at a Bavarian assembly company
  • The TPM can optionally be permanently soldered

Further information and links can be found at www.LetsTrust.de

Hardware installation:

Step 1: Attach the 8-pin header to pin 1 of the Raspberry Pi

Note: the picture shows the Pi Zero WH (with pre-soldered header). The LetsTrust TPM is of course also compatible with the Raspberry Pi 1/2/3.
The pin header has pins at the top that can be used directly for other projects if necessary. Attaching the 8-pin header is used to determine the correct pins for attaching the LetsTrust TPM module and is not required for its function.

Step 2: Plugging in the LetsTrust TPM module
The module is plugged directly next to the 8-pin header.


  • Pi Zero WH not included, but recommended for easy plug & play entry without soldering
  • Software installation necessary to use the module – see www.letsTrust.de from Rasbian with Kernel 4.14.85 DTO support.
  • The module also works under Windows 10 IoT Core and the platforms Pi 2, 3, 3B + supported by it!
  • The module is delivered with firmware> = 7.85


Vekt50 g
Manufacturer Product Number
Country of OriginDE
HS Tariff Code84718000


Det er ingen omtaler ennå.

Show only reviews in Norsk (0)

Bli den første til å omtale “LetsTrust TPM til Raspberry Pi”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *