Edatec HMI2020 based on CM4

241,22268,04
(192,98 excl. VAT)

CM4 10.1” Industrial Panel Computer V1.0 Version.

Often bought with:

DC Power Supply for Edatec HMI and IPC - ED-PSU1202-EU-3.5PL

High quality power supply for for example Edatec HMI and IPC.

SKU: N/A Categories: ,

Description

ED-HMI2020-101C

◆ Features

Rasberry Pi CM4-based 10.1″ Industrial Tablet PC

  • 10.1″ WSVGA TFT, 1280×800 resolution, multi-point capacitive touchscreen
  • Broadcom BCM2711 4-core Cortex-A72 64-bit processor
  • Up to 8GB of LPDDR4 RAM and 32GB of eMMC
  • LAN port rate supports up to 1Gbps
  • 2.4GHz & 5GHz Wi-Fi and Bluetooth wireless method
  • Support micro-SD Card, integrated RTC, EEPROM and encryption chip
  • 9V~28V wide voltage power input with over-current, over-voltage, reverse connection and surge protection
  • High quality metal case, support embedded installation

◆ Documents Download

Datasheet Download
Application Guide Download
User Manual Download

◆ Specifications

System
CPUBroadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
VPU
H.265(HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode)
GPUOpenGL ES 3.1 & Vulkan 1.0
MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM
Storage
– Options for 8GB, 16GB, 32GB eMMC storage
– Micro SD card (user storage expansion)
Software
Operating
System
– Raspberry Pi OS(Desktop) 32-bit
– Raspberry Pi OS(Lite) 32-bit
– Raspberry Pi OS(Desktop) 64-bit
– Raspberry Pi OS(Lite) 64-bit
Front I/O
Camera Built-in 800M front camera
Side I/O
Power1 x DC IN, DC Jack connector, supports 9V~28V input.
Audio
1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LNE OUT.
– When a headphone is connected, the audio output switches to the headphone.
– When no headphone is connected, the audio output switches to the speaker
1000M
Ethernet
1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module
SD Card Slot 1 x Micro-SD card slot, uses to install SD card for storing user data.
HDMI1 x HDMI port, type A connector. It compatibles with HDMI2.1 standard and supports 4K 60Hz.
USB 2.0 2 x USB2.0 ports, type A connector, support up to 480Mbps.
Antenna1 x SMA port, uses to connect Wi-Fi/BT antenna.
Speaker1 x PA output, dual channel stereo audio output, built-in two 4Ω 5W speakers.
Buttons and Indicators
Reset1 x Reset button, which can reset the device.
Rpiboot1 x Rpiboot button, uses to flash eMMC for the system.
PWR1 x red power indicator, uses to check the status of device power-on and power-off.
ACT1 x green system indicator, uses to check the working status of device.
Expansion Performance
EEPROMSupports 4K byte storage and improves the ease of use of device.
Crypto
Authentication
It can be matched to realize the required upper layer application and improves the security of device.
RTC 
Ensure that the system clock is not affected by device power-off.
Note: A CR1220 battery is provided by default in China.
Buzzer
A tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Expansion I/O
12V 1A
1 x DC OUT, 2-Pin 2.0mm spacing connector, support 12V 1A output. These pins
are defined as GND/12V, reserve to provide power supply for extended LCD.
40-pin GPIO
1 x GPIO, 2×20-Pin 2.54mm pitch header, uses to lead out the GPIO ports of CM4.
– These pins are defined as GPIO1~GPIO27/3V3/5V2/GND.
– Compatibles with expansion modules, and reserves to connect expansion accessories.
HDMI 
1 x FPC HDMI, 40-pin 0.5mm spacing FPC connector, which can be reserved to connect extended LCD, supports USB/I2C touch screen and backlight adjustment.
USB 1 x USB 2.0, 5-pin 1.27mm spacing FPC connector, supports to expand the USB2.0 interface.
LCD
LCD Size10.1″ WSVGA TFT
Resolution1280×800
Colors16.7MB
Active Area 135.36mm(H) x 216.576mm(V)
BacklightLED
MTBF>30000h
Pixel Pitch0.169mm x 0.169mm
Luminance350cd/m^2
Contrast Ratio  1000:1
Response Time30ms
Viewing Angle (H/V)
80°/80°
Touch Screen
TypeMulti-point Capacitive Touch Screen
Transmittance≥85%
Connection Method
COF
Controller Interface
I2C
Driver SupportLinux
Multi-touch10 points
Surface Hardness
6H
Electrical Characteristics
Input Voltage9V ~ 28V DC
Maximum Power 
Consumption
20W
Mechanical Characteristics
Dimensions263mm x 177mm x 40mm (WxDxH, antenna is not included.)
Weight 1.1Kg
Installation Embeded installation, including front installation and rear installation.
Wireless
Wi-Fi
(optional)
2.4GHz and 5GHz dual-band Wi-Fi with antenna.
– 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
– 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
Bluetooth 
(optional)
Bluetooth 5.0 with antenna, compatible with 2402MHz ~ 2480MHz frequency.
Environmental & Regulatory
Operating
Temperature
0°C ~ 50°C
Storage
Temperature
-10°C ~ 60°C
Ambient Humidity
20% ~ 90%(non-condensing)
Certifications
FCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2

◆ System Block Diagram

◆ Dimension Unit:mm

◆ Oder Information

Additional information

Weight1100 g
Model

WiFi, 2GB RAM, 8GB Storage, WiFi, 4GB RAM, 16GB Storage

GTIN / EAN / UPCN/A
N/A
Manufacturer Product NumberN/A
N/A
BrandEdatec
Country of OriginCN
HS Tariff Code8543709860

Reviews

There are no reviews yet.

Show only reviews in English (0)

Be the first to review “Edatec HMI2020 based on CM4”

Your email address will not be published. Required fields are marked *

You may also like…