Edatec CM5 Active Cooler

99,00 kr.
(79,20 kr. eksl. moms)

  • Aluminiumsprofil, CNC-skåret, nem at installere
  • Active Cooler med temperaturstyret blæser og forudinstalleret med termisk ledende silikone
  • Fremragende køleydelse til at reducere temperaturen på Raspberry Pi CM5 CPU, Wi-Fi-modul og strømstyringschip

På lager

Varenummer (SKU): 9664 Kategori: Kompatibilitet:

Beskrivelse

In the box

1 x ED-CM5ACOOLER
1 x Accessory Set (With 4 x M2.5*8 screws, 4 x M2.5*H1.5 nylon gaskets and
4 x M2.5*H3 nylon gaskets)

Installation

There are two ways to install ED-CM5ACOOLER, you can insert Raspberry Pi CM5 first or place nylon gaskets first.

Installation 1

Parts list:

  1. ED-CM5ACOOLER x 1 pcs
  2. Raspberry Pi CM5 (Not provided) x1 pcs
  3. Motherboard (Not provided) x 1 pcs
  4. M2.5*H1.5 or M2.5*H3 nylon gaskets x 4 pcs
  5. M2.5*8 Screws x 4 pcs

Note

  • Before you start installing, please remove the White Protective Paper from thermal silicone in the ED-CM5ACOOLER.
  • Before you start installing, please make sure that the height of Raspberry Pi CM5 connector is 1.5mm or 3mm.
    If the height is 1.5mm, you need select 4 M2.5*H1.5 nylon gaskets to install ED-CM5ACOOLER.
    If the height is 3mm, you need select 4 M2.5*H3 nylon gaskets to install ED-CM5ACOOLER.
  • If you need to design a case, it is recommended that the heat sink holes in the case are close to air outlet of the
    temperature-controlled blower fan on the ED-CM5ACOOLER.

Steps

  1. Place 4 M2.5*H1.5 nylon gaskets or 4 M2.5*H3 nylon gaskets in the four screw hole positions on the Motherboard.
  2. Insert Raspberry Pi CM5 into Motherboard through the connector.
  3. Place the ED-CM5ACOOLER on the Raspberry Pi CM5, align the 4 screw holes and insert 4 M2.5*8 screws from the
    bottom of the Motherboard. Tighten them clockwise using a screwdriver to install the ED-CM5ACOOLER onto the
    Raspberry Pi CM5.

Installation 2

Parts list:

  1. ED-CM5ACOOLER x 1 pcs
  2. Raspberry Pi CM5 (Not provided) x 1 pcs
  3. Motherboard (Not provided) x 1 pcs
  4. M2.5*H1.5 or M2.5*H3 nylon gaskets x 4 pcs
  5. M2.5*8 Screws x 4 pcs

Note

  • Before you start installing, please remove the White Protective Paper from thermal silicone in the ED-CM5PCOOLER.
  • Before you start installing, please make sure that the height of Raspberry Pi CM5 connector is 1.5mm or 3mm.
    If the height is 1.5mm, you need select 4 M2.5*H1.5 nylon gaskets to install ED-CM5PCOOLER.
    If the height is 3mm, you need select 4 M2.5*H3 nylon gaskets to install ED-CM5PCOOLER.
  • If you need to design a case, it is recommended that the heat sink holes in the case are close to air outlet of the
    temperature-controlled blower fan on the ED-CM5ACOOLER.

Steps:

  1. Insert Raspberry Pi CM5 into Motherboard through the connector.
  2. Place 4 M2.5*H1.5 nylon gaskets or 4 M2.5*H3 nylon gaskets in the four screw hole positions between the Raspberry Pi CM5 and the Motherboard.
  3. Place the ED-CM5ACOOLER on the Raspberry Pi CM5, align the 4 screw holes and insert 4 M2.5*8 screws from the
    bottom of the Motherboard. Tighten them clockwise using a screwdriver to install the ED-CM5ACOOLER onto the Raspberry Pi CM5.
  4. Plug the power cable of temperature-controlled blower into the FAN connector on the Motherboard.

Specifications

Frequency Generator (FG) Signal for Temperature-controlled Blower

PWM Control Signal for Temperature-controlled Blower

PWM Test Record for Temperature-controlled Blower

Yderligere information

Vægt32 g
GTIN / EAN / UPC6976558371364
Manufacturer Product NumberED-CM5ACOOLER
BrandEdatec
Country of OriginCN
HS Tariff Code8414591500

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Show only reviews in Dansk (0)

Vær den første til at anmelde “Edatec CM5 Active Cooler”

Din e-mailadresse vil ikke blive publiceret. Krævede felter er markeret med *