Edatec IPC3020 baseret på Pi 5

1.399,00 kr.1.799,00 kr.
(1.119,20 kr. eksl. moms)

Høj pålidelig industricomputer baseret på Raspberry Pi 5.

Ofte købt med:

Officiel Raspberry Pi 5 USB-C Strømforsyning - EU - 5V 5A - Sort

Den rette strømforsyning til din Raspberry Pi 5 med 27W!

Varenummer (SKU): N/A Kategori: Kompatibilitet:

Beskrivelse

ED-IPC3020

ED-HMI3020 Series Features
FunctionsParameters
CPU
Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76
RAM
4GB and 8GB LPDDR4X-4267 SDRAM are optional
StorageSupport Micro SD Card and M.2 NVMe SSD storage expansion
Video
Dual 4Kp60 HDMI display output
Audio
Stereo audio input and output with separately 3.5mm audio jack
Interface
1 x Gigabit ethernet port with optional PoE, 2 x USB 3.0, 2 x USB 2.0, 1 x RS232, 1 x RS485 and 1 x Buzzer
Power Input
5V DC power input via USB-C, support ON/OFF power button
Other
Built-in RTC, support SuperCAP and CR1220 battery backup
Operating Temperature-25°C ~ 60°C
Mechanical
102.8mm(W) x 89.5mm(D) x 32.5mm(H), 300g
Fanless design with high-quality metal case and big heatsink, providing excellent cooling performance

Document Download

Specifications

System
CPUBroadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76
VPU4Kp60 HEVC decoder
GPUOpenGL ES 3.1 & Vulkan 1.2
Memory 4GB and 8GB LPDDR4X-4267 SDRAM are optional
StorageMicro SD Card Slot, supporting to select the 00GB/32GB/64GB SD card
M.2 NVMe SSD, supporting to select the 00GB/128GB/256GB SSD

Software
Operating System
– Raspberry Pi OS(Desktop) 32-bit
– Raspberry Pi OS(Lite) 32-bit
– Raspberry Pi OS(Desktop) 64-bit
– Raspberry Pi OS(Lite) 64-bit

Front I/O
Audio OUT1 x Audio Output(HPO), 3.5mm audio jack connector(green), stereo audio output.
Audio IN1 x Audio Input(LINE IN), 3.5mm audio jack connector(red), supporting stereo audio input.
RS4851 x RS485 port, 3-Pin 3.5mm spacing phoenix terminals with 120Ω terminal resistor.
The signal is defined as GND/A/B.
RS2321 x RS232 port, 3-Pin 3.5mm spacing phoenix terminals, the signal is defined as GND/TX/RX.
USB 2.02 x USB 2.0 ports, dual layer type A connector, each channel supports up to 480Mbps.
USB 3.0 2 x USB 3.0 ports, dual layer type A connector, each channel supports up to 5Gbps.
1000M Ethernet
1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network.
PoE can be supported through expansion module.

Rear I/O
SD Card Slot
1 x Micro SD card slot, which is used to install SD card. It supports booting the OS from SD card.
Side I/O
HDMI
2 x HDMI ports, Micro HDMI connector, supporting 4K 60Hz.
Power1 x power in port, USB Type-C connector, supporting 5V/5A DC power input.
Buttons and Indicators
ON/OFF1 x power button, which is used to turn on and turn off the device.
PWR1 x red power indicator, which is used to check the status of device power-on and power-off.
ACT1 x green system indicator, which is used to check the working status of device.
COM1~COM22 x green UART indicators, which is used to check the communication status of UART port.

Internal I/O
5V 1A
1 x DC OUT, 3-Pin 2.0mm spacing WTB connector, supporting 5V 1A output. These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
Speaker
1 x PA output, 4-Pin 1.5mm spacing WTB connector, dual channel stereo audio output. It can be extended to connect two 4Ω 3W stereo speakers, these pins are defined as R+/R-/L+/L-.
MIPI CSI/DSI
2 x MIPI CSI/DSI ports, 2-Lane CSI/DSI signal. They are reserved for connecting extended LCD screen, supporting I2C touchscreen and backlight adjustment.
M.2 M
1 x M.2 M port, M.2 M Key connector, using to connect SSD and other fast peripherals.
It compatibles with M.2 2230, M.2 2242 and M.2 2260, supporting to boot the OS from SSD.
Expansion Performance
RTC
RTC with SuperCAP and CR1220 battery backup, which can ensure that the system clock is not affected by device power-off.
Note:A CR1220 battery is provided by default in China.
BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.

Electrical Characteristics
Input Voltage5V DC
Maximum Power Consumption25W(Max)

Mechanical Characteristics
Dimensions
102.8mm x 89.5mm x 32.5mm (WxDxH)
Weight300g
InstallationPlacing on the desk

Wireless
Wi-FiDual-band 802.11ac Wi-Fi
BluetoothBluetooth 5.0 / Bluetooth Low Energy (BLE)

Environmental & Regulatory
Operating Temperature-25°C ~ 60°C
Storage Temperature-25°C ~ 60°C
Ambient Humidity5% ~ 95% (non-condensing)
Certifications
FCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2

System Block Diagram

Dimension Unit:mm

Oder Information

Yderligere information

Vægt500 g
RAM, Storage, PoE

4GB RAM + 32GB SD + No PoE, 8GB RAM + 32GB SD + No PoE, 4GB RAM + 128GB NVMe SSD + No PoE, 4GB RAM + 128GB NVMe SSD + Yes PoE

GTIN / EAN / UPC6976558370985
6976558370992
N/A
N/A
Manufacturer Product NumberED-IPC3020-04320
ED-IPC3020-08320
ED-IPC3020-04001
ED-IPC3020-04001-P
BrandEdatec
Country of OriginCN
HS Tariff Code8543709860

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Show only reviews in Dansk (0)

Vær den første til at anmelde “Edatec IPC3020 baseret på Pi 5”

Din e-mailadresse vil ikke blive publiceret. Krævede felter er markeret med *

Du kunne også være interesseret i...