7,5″ E-Paper E-Ink Display HAT (B) til Raspberry Pi

499,00 kr.
(399,20 kr. eksl. moms)

7,5″ E-Paper E-Ink Display HAT (B) til Raspberry Pi, 800×480 pixel, rød/sort/hvid trefarvet, SPI-grænseflade.

Kun 5 tilbage på lager

Varenummer (SKU): 9916 Kategori: Kompatibilitet: ,

Beskrivelse

In the box

  1. 7.5inch e-Paper (B) x1
  2. e-Paper Driver HAT x1
  3. RPi screws pack (2pcs) x1
  4. PH2.0 20cm 8Pin x1
1
2
3
4

7.5″ E-PAPER HAT (B)

Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

Ideal for price tags, shelf labels, industrial instruments…

    • Size7.5″
    • Resolution800×480
    • Viewing Angle>170°
    • Display ColorRed / Black / White
    • Grey Scale2
  • CommunicationSPI
  • Display PanelE-paper
  • ExperiencePaper-like
  • EnvironmentAmbient Light Required
  • Display TypePassively Reflective

Features At A Glance

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

OPERATING VOLTAGE3.3V/5VDISPLAY COLORred, black, white
INTERFACE3-wire SPI, 4-wire SPIGREY SCALE2
OUTLINE DIMENSIONS170.2 × 111.2mmFULL REFRESH TIME16s
DISPLAY SIZE163.2 × 97.92mmREFRESH POWER48mW (typ.)
DOT PITCH0.205 × 0.204mmSTANDBY CURRENT<0.01uA (almost none)
RESOLUTION800 × 480 pixelsVIEWING ANGLE>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

Raspberry Pi, Jetson Nano in the photo are NOT included.

Onboard SPI Control Interface

For Use With Other Controller Boards Like STM32/Arduino

VCC3.3V/5V
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData / Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, high active

* for Arduino UNO, due to its RAM limit, it is better to choose the e-Paper Shield

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags…

Outline Dimensions

 

WIKI: 7.5inch_e-Paper_HAT_(B)

Yderligere information

Vægt164 g
GTIN / EAN / UPC
Manufacturer Product Number
BrandWaveshare
Country of OriginCN
HS Tariff Code8486204900

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Vær den første til at anmelde “7,5″ E-Paper E-Ink Display HAT (B) til Raspberry Pi”

Din e-mailadresse vil ikke blive publiceret. Krævede felter er markeret med *